Note: The current Windows release is 7.10.19 and can be downloaded from the link above. If a beta firmware version is available and you want to install it instead, click the Install Beta Firmware link. Click Install Vxxx where xxx is the firmware version number you're about to install.If your Performance Monitor firmware is current, the Concept2 Utility will let you know that as well. The Concept2 Utility checks the firmware currently installed on the Performance Monitor and will indicate whether an update is available.Wait until you see ‘CONNECTED’ in the green box on the Concept2 Utility. Connect your Performance Monitor to your computer with the USB cable.Please check your computer to see what type of USB plug it accepts. This method requires a USB cable that has a USB Type-B plug on one end for plugging into the Performance Monitor, and either a USB Type-A or USB Type-C plug on the other end for connecting to your computer (this is the same cable used to plug in a printer). Updating the Firmware with a USB Flash Drive Previously Used with Concept2 Equipment When updating from firmware version 12 (indoor rowers) or 712 (SkiErgs) and earlier, follow the USB Cable procedure. You can then do your workout or take the USB flash drive to another PM5 that needs updating. The update is complete when the PM5 displays the Main Menu. The update takes several minutes, and the PM5 displays “update in progress” messages during this time.

Select Update Now twice to start the update.The PM5 will ask if you want to install the new firmware.Mac: Finder > Applications > Concept2 Utility.Use the Concept2 Utility to load current firmware files onto the flash drive.The PM5 will prompt you to name the USB Logbook (use the arrow and +/- keys to create a name, then press the checkmark).

Plug the USB flash drive into your PM5 and wait 10–15 seconds. Initialize the USB flash drive with the PM5.Disk Utility will complete the formatting. Select Erase at the top of the application window.The flash drive will be visible in the left column. Under View Options, select Show All Devices.Run Disk Utility (Finder > Applications > Utilities > Disk Utility).Select File System and click FAT or FAT32.

Open This PC or Computer (depending on OS version).

Insert the flash drive into your computer.

Windows-Format to FAT or FAT32 (not exFAT or NTFS).

This will erase all folders on the drive.

Jump paint mac